Optimization of flocculation process and continuous filtration for sea water primary treatment filtration to reduce SDI for entree to reverse osmosis system

Today , Providing drinking water and process water is one of the major problems in most countries ; the surface water often need to be treated to achieve necessary quality, and in this way, technological and also financial difficulties cause great restrictions in operating the treatment units. Although water supply by simple and cheap systems has been one of the important objectives in most scientific and research centers in the world, still a great percent of population in developing countries, especially in rural areas, don't benefit well quality water. One of the big and available sources for providing acceptable water is sea water. There are two ways to treat sea water first evaporation and second reverse osmosis system. Nowadays R.O system has been used for desalination because of low budget price and easily to operate and maintenance. The sea water should be pretreated before R.O plants, because there is some difficulties in raw sea water that can decrease yield point of membranes in R.O system. The subject of this research may be useful in this way, and we hope to be able to achieve complete success in design and construction of useful pretreatment systems for R.O plant. One of the most important units in the sea water pretreatment plant is filtration, the conventional method for filtration is pressurized sand filters, and the subject of this research is about new filtration which is called continuous back wash sand filtration (CBWSF). The CBWSF designed and tested in this research may be used more economically with less difficulty. It consists two main parts first shell body and second central part comprising of airlift pump, raw water feeding pipe, air supply hose, backwash chamber and sand washer as well as inlet and outlet connections. The CBWSF is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Inlet water is fed through the sand bed while the sand bed is moving downwards. The water gets filtered while the sand becomes dirty. Simultaneously, the dirty sand is cleaned in the sand washer and the suspended solids are discharged in backwash water. We analyze the behavior of CBWSF in pretreatment of sea water instead of pressurized sand filter. There is one important factor which is not suitable for R.O membranes, it is bio-fouling. This factor is defined by Silt Density Index (SDI).measured by SDI. In this research has been focused on decreasing of SDI and NTU. Based on this goal, the prototype of pretreatment had been designed and manufactured to test. The system design was done mainly by using the design fundamentals of CBWSF. The automatic backwash sand filter can be used in small and also big water supply schemes. In big water treatment plants, the units of filters perform the filtration and backwash stages separately, and in small treatment plants, the unit is usually compacted to achieve less energy consumption. The analysis of the system showed that it may be used feasibly for water treating, especially for limited population. The construction is rapid, simple and economic, and its performance is high enough because no mobile mechanical part is used in it, so it may be proposed as an effective method to improve the water quality and consequently the hygiene level in the remote places of the country.

Development of a process for canning fresh water fish rohu (Labeo rohita)

Results of experiments conducted to work out a process for canning fresh water fish rohu (Labeo rohita) from culture sources are presented. In order to impart a proper firm texture to the meat cold blanching the skinless boneless meat in 15% brine containing 0.25% calcium chloride was found necessary. Increasing the concentration of calcium chloride beyond 0.25% resulted in impairing the quality of meat, the texture becoming more fibrous and the flavour being adversely affected. Other firming agents tried did not yield any beneficial effect. The meat so blanched yielded a good product when canned in natural style.

Optimization of stocking density for environmental-friendly improved extensive shrimp farming system in south-west part of Bangladesh

An experimental culture practice of P. monodon on extension approach was conducted in two brackish water earthen ponds of Demonstration Farm and Training Center (DFTC), Kaliganj, Satkhira. The experiment was aimed to provide farmers with appropriate technology that can immediately improve pond yield with keeping the environment in friendly condition. For optimization of stocking density of a cost effective environmental friendly improved extensive shrimp farming, the ponds were stocked with coastal river post larvae of P. monodon at the stocking rates of 2 pls/m² and 2.5 pls/m² without supplementary feeding. To control experimental error another five farmer's gher were used as replicates of each demo-pond. Considering the farmers buying ability, cost of inputs and other facilities kept minimal. The impact of stocking density was evaluated on the basis of growth, survival rate, production and economic return. Better production (average 299.01 kg/ha) with same survival rate (39.33%) were found with a stocking density of 2.5 pls/m² without causing any deterioration in the culture environment.

Optimization of dose of methyltestosterone (MT) hormone for sex reversal in tilapia (Oreochromis niloticus L.)

This paper describes the optimization of dose of methyltestosteronei (MT) hormone for masculinization of tilapia (Oreochromis niloticus). Five treatments (i.e. T1 T2, T2, T4 and T5) with different doses such as 0, 40, 50, 60 and 65 mg of MT hormone were mixed with per kg of feed for each treatment and fed the fry four times a day up to satiation for a period of 30 days. The stocking density was maintained 10 spawn/liter of water. The growth of fry at different treatments was recorded weekly and mortality was recorded daily. At the end of hormone feeding the fry were reared in hapas fixed in ponds for another 70 days and at the 100th day the fish were sexed by the gonad squashing and aceto-carmine staining method. The analysis of growth data did not show any significant variation in length and weight of fish among the different treatments. High mortality of fry ranging 66% to 81.6% was observed in different treatments and highest mortality was observed during the first twelve days of the experiment. The sex ratio analysis showed that T2 (40 mg/kg) and T5 (65 mg/kg) produced 93.33% of sex reversed male and T3 (50 mg/kg) and T4 (60 mg/kg) produced 96.66% sex reversed male, and these ratios were significantly (p<0.05) different from 1:1 male: female sex ratio. The control, T1 (0 mg/kg) contained 43.33% male progeny. From these results it is suggested that either 50 mg/kg or 60 mg/kg of MT with a feeding period of 30 days could be considered as an optimum dose for masculinization of tilapia (O. niloticus).